GENERAL INFORMATION
GENERAL INFORMATION
| ESTABLISHED: | May 1990 | |
| FACILITY: | 3000 square feet (manufacturing / sales) | |
| 1200 square feet (tooling) | ||
| LOCATION: | 2829 So. Rodeo Gulch Rd. #6 | |
| Soquel, Ca., 95073 | ||
| (831) 464-1111 Plasco Corporation | ||
| (831) 464-1100 direct fax | ||
| EMPLOY: | 5-9 | |
| HOURS: | PRODUCTION: 7AM - 4PM | |
| OFFICE: 8AM - 4:30PM | ||
| CONTACTS: | Michael LoDico | President |
| Thol Keo | Production | |
| Kayla Gammino |
Customer Service Mgr | |
| DIES/MOLDS/
PLASTICS MOLD/FAB: |
Die design and fabrication, custom injection plastic molding, structural foam, secondary assembly, insert molding, packaging, heat staking, hot stamping, drill and tapping, CAD product & tool design, JIT programs available | |
|
|
||
| BUILDING: | Modern 4200 square feet,
concrete and wood
construction, fire and security protection.
General Administrative Office Sales Department Custom Plastics Injection Molding Secondary Operations Engineering and Design Department Tool Construction -hard, soft, and short run. Tool Maintenance |
|
| MOLDING:
ON-SITE |
(3) Boy Injection molding machines, equipped with the latest technology, ranging in size up to 4.0 ounce, clamp tonnage of 15, 22, 28, and 50 tons. | |
| MOLDING:
OFF-SITE |
(3) Custom mini injector molding machines, equipped with the latest technology, ranging in size up to 3.0 grams, clamp tonnage from 3 to 5 tons. | |
| DRYING: | (3) hot air / desiccant dryers with machine mounted drying hoppers. | |
| MOLD TEMPERATURE: | (3) Mold heater systems (circulating fluid) | |
| (3) Single zone mold temperature controller | ||
| (1) Two zone mold temperature controller | ||
| (1) Four zone mold temperature controller | ||
| (1) DME gate mate system for sprueless molding | ||
| (1) Moldmaster direct gating system | ||
| GRINDING: | Portable granulator for plastic recycling | |
| QUALITY: | We work to MIL-STD-105E.
General Inspection Level I AQL 1.0 We offer a Total Process Control (TPC) Program Cpk
>1.33 with the ability
to maintain 2.0 +
|
|
| SECONDARY OPERATIONS: | Miscellaneous equipment to
complete secondary
operations for injection molded parts, including:
Bridgeport milling machine, Drill presses, Sonic welding equipment, Heat staker, Threader and tapping machine. |
|
| INSPECTION: | Standard inspection equipment to
maintain quality
control for close tolerance parts, including:
Surface plates, Gauge pins, and blocks Dial and Digital calipers, micrometers Height gauges, Inspection microscope Optical Comparator |
|
| TOOL SHOP: | Fully equipped, 1200 square feet, shop for construction and maintenance of injection molding dies, including: | |
| (1) Aratron EDM machines MOD 350
50 amp. RSF
Electronik D.R.O. .0001 resolution with 3R tooling
Bridgeport milling machine Series I D.R.O. 3-axis (1) Harig 6-18 surface grinders (1) Walker electric-magnetic chuck with auto demag. Walker magnetic chuck with wet grinding attachment Sakazki SOE type cutter grinder
(1) Harig grind-alls and (1) radius dresser attach.
(1) 6 inch magna / sine Nikon toolmakers' microscope
Gauge pins - 0.011" to 0.500" Inspection Microscope and micrometers to 7 inches |
||